|Name:||Graphene Synthesis Furnace||Heating Source:||Microwave & Electric|
|Working Temperature:||0~950°C||Microwave Leakage Prevention:||<2mW/cm2|
|Temperature Measurement Method:||Thermocouple||Payment Method:||T/T|
Microwave Graphite Reduction Furnace Graphene Synthesis Mass Capacity Large Diameter
HY-PH9010E can function continuously under 1000°C, while the perfect graphite reduction temperature shall be around 950°C according to literature and experience.
HY-PH9010E is able to produce 2 dimension / 3 dimension graphene depending on the quality of sample graphite.
The graphite reduction process can be finished whithin seconds, which enables instant production of large amount high-quality graphene.
HY-PH9010E is equiped with pre heating device to heat nitrogen before entering the tube, which will save time compared to furnace without pre heating device since it will take time for temperature to recover to 950°C with the inflow of cold nitrogen gas.
HY-PH9010E is always be applied to continuously production of graphene by graphite oxide exfoliation.
|Electrical Heating Power||15KW|
|Microwave System||Microwave Output Power||0.10~8.40KW continuously adjustable|
|Microwave Leakage Prevention||microwave leakage intensity <2mW/cm2|
|Thermal Insulation System||Tmax||1000°C|
|Heating Space (D×H)||Φ200×600mm|
|Temperature Control System||Temperature Measurement Method||thermocouple|
|Temperature Measurement Range||0~1300°C|
|Temperature Control Precision||±0.1%|
|Control System||Auto, Manual and Isothermal Controlling Mode,
|40 segments of programmable technical parameters, data storage and export,
real-time curve data display, dynamic data display
|Safety System||Magnetron Alarm||over temperature alarm|
Contact Person: Karen